This article gives an overview of how the JubileeTV Voice Remote works with the JubileeTV Console and how the Voice Remote controls source devices.
Infrared (IR) Controls
IR is the most widely used method for remote controls to command TVs and other devices. However, IR requires a direct path without any obstacles between the remote and the device. If your JubileeTV Console is not in clear sight of your devices, such as your TV, set-top box, or DVD/Blu-ray player, you will need to use an IR Blaster to extend the IR signal's reach.
Network (IP) Controls
JubileeTV can control devices like Roku streaming players using IP Controls, which send commands over your home network. This method is quicker and more dependable than IR control and is the recommended way to use JubileeTV. However, for IP Controls to work, JubileeTV needs to be on the same network as the device it's controlling.
Devices:
- Roku
CEC (Consumer Electronics Control)
HDMI-CEC is a protocol which allows commands to be sent through the HDMI cable. Some devices (like Amazon Fire TV and Apple TV) will be controlled via CEC.
BT (Bluetooth)
The JubileeTV Voice Remote communicates with the JubileeTV Console using a Bluetooth connection. Unlike the Console and IR Blasters, which use IR signals to manage your devices, the Voice Remote operates solely through Bluetooth. To maintain the connection, it's essential to keep the Voice Remote within 30 feet of the Console. If the remote strays too far and the Bluetooth disconnects, it will automatically try to reconnect once it's back in range.
Before you can use the Voice Remote to control JubileeTV or your other devices, you need to pair it with the JubileeTV Console. Remember, each Voice Remote can only be paired with one JubileeTV Console. If you have multiple Consoles in your home, each one will require its own Voice Remote.